Explanations, Walk through, tips and techniques related to LightUp
-
AdamB
- Site Admin
- Posts: 2296
- Joined: Wed Apr 16, 2008 10:11 am
- Location: Brighton, UK
-
Contact:
Post
by AdamB » Mon May 19, 2014 2:54 pm
lucas_nico wrote:Hi Adam,
another one, attached you'll see the results I want to achieve, can I get something like this with lightUp or am I on the wrong track?
Those have been done with the shadow and sun of sketchup ...
thanks,
Anja.
Yes, if you have just Direct (sun)light and turn it up very high so surfaces are either fully white or black, you should get this effect.
Adam
-
lucas_nico
- Posts: 9
- Joined: Tue Apr 15, 2014 9:54 am
Post
by lucas_nico » Fri Jun 13, 2014 9:37 am
Hi Adam, did you get my last post?
Can you help?
Thanks anyway
Anja
-
AdamB
- Site Admin
- Posts: 2296
- Joined: Wed Apr 16, 2008 10:11 am
- Location: Brighton, UK
-
Contact:
Post
by AdamB » Tue Jun 17, 2014 9:00 am
Best contact the help @ light-up .co .uk email to resolve this.
-
lucas_nico
- Posts: 9
- Joined: Tue Apr 15, 2014 9:54 am
Post
by lucas_nico » Thu Jun 26, 2014 12:01 pm
Hi Adam, I try to achieve a result as shown in the picture attached - any idea if I can do that with light up?
The one I did was done with the sun of sketchup which oviously doesn't work for interiors?
Any ideas?
Thanks a lot,
Anja.
-
AdamB
- Site Admin
- Posts: 2296
- Joined: Wed Apr 16, 2008 10:11 am
- Location: Brighton, UK
-
Contact:
Post
by AdamB » Tue Jul 01, 2014 8:46 am
Yes, as I posted before. You can just have a very powerful sunlight and no other illumination to get a very hard black/white rendering.
-
roychooi
- Posts: 1
- Joined: Tue Aug 05, 2014 12:41 pm
Post
by roychooi » Tue Aug 05, 2014 12:56 pm
Hi adam, I have just upgrade my v3 to v4, as my SKU are in 2014 v14.0.4899, light up V4 do seem working well. upon i start the tour, SKU immediately close the application. may i know what go wrong?
